Features/Specs
The capacity of PowerPusher equipment is based on many variables. For this reason, we have set up a talented team to help guide you through the selection process. Contact us to get started.
Yes, the PowerPusher equipment can push and pull.
No, our electric pushers and tugs use regular deep cycle marine batteries.
Yes, PowerPusher specializes in making custom attachments to match our equipment to yours.
Yes, the MFC-100 includes a high-powered actuator for lifting loads. In special cases, the two-wheeled PowerPushers can be modified to incorporate lifting.
Yes, all PowerPushers include braking. There is also an additional option of an automatic parking brake on some.
The PowerPusher can be charged on a 100-240 Volts AC, single phase, 50 or 60 Hz electrical service. The max amp draw varies by machine but is no more than 7.5 amps max.
The run time depends on the load it is moving and the environment it is being used in. In general, the PowerPushers should last 2-6 miles in between charges.
It takes 6- 8 hours to charge the batteries.
Because PowerPushers are tailored to specific applications, the weight will vary to optimize both traction and power at the lowest cost.
The speed of each machine varies based on the configuration of torque vs. top speed.
Yes, the top speed and acceleration speed are programmable for both forward and reverse.
Buying & Support
None of our machines require a license to operate. Further, most anyone can learn to operate proficiently with very minimal training.
They are made in Shakopee, Minnesota, and shipped to Canadian customers of Ergo1st.
Depending on what you are moving (weight) and the attachment, the cost varies. Please fill out and submit our contact form or call our office at 800-800-9274
One year from date of receipt on all parts.
It depends on what you are buying and where you are located. Visit our contact page to get started.
Submit a form request here or call 514-624-3498.
Submit a request here or call us at 514-624-3498.