PowerTug™
Mobilize Loads Over Uneven Surfaces
The PowerTug is a battery-powered tugger designed to promote productivity with minimal manpower by moving up to 2,725 kg (6,000 lbs) with ease. Whether you’re moving loads on even or uneven surfaces, we’ve got you covered. Our units accommodates various load heights, giving you ultimate control.
Check out the video to discover all the details about the PowerTug
Benefits of Our PowerTug
The PowerTug brings unmatched power and efficiency to industrial work environments. It provides critical support for moving high-resistance loads with ease. Some of its key benefits include:
Mobilizing Loads
Tackle uneven surfaces with complete control.
Compact Size for Easy Maneuverability
The PowerTug is designed to make maneuvering large loads easy - even in tight spaces.
Long Lasting Operation
On-board charger so you never have to worry about low battery life.
Enhanced Safety
Automatic braking for operator safety.
PowerTug - Specifications & Dimensions
The Power Tug™ offers:
- Motor: 24 volt D.C. – 600W (1,135 kg (2,500 lbs) capacity), or 1200W (2,725 kg (6,000 lbs) capacity).
- Drive Mechanism: Planetary Gearbox, 18:1 reduction, through mono-drive wheel.
- Controller: Fully programmable digital, with diagnostic capability, four quadrant full bridge power output stage.
- Batteries: 2 x 60 Amp/hour dry fit, gel type sealed & maintenance free.
- Battery Charger: On-Board, 3 stage 2 x 10 Amp circuits (110v or 240v input).
- Push/Pull Capacity: Up to 2,725 kg (6,000 lbs). (Subject to rolling resistance of load).
- Mono-drive wheel for stable performance on uneven surfaces
- Fingertip controls for operator convenience and ease-of-use
- On-board charger for long-lasting, efficient operation
- Automatic braking and emergency reverse protection improves operator safety
- Fully programmable control system with diagnostic features to adjust speed and acceleration/deceleration based on load and environment
- Ergonomic handles for operator comfort
- Compact size for easy maneuverability of the battery-powered tug
- Polyurethane drive wheel outer with alternative tread patterns and material specifications
121.92 cm H × 140.97 cm L × 62.23 cm W
48” H x 55.50” L x 24.5” W
- Audible motion beeper
- Safety strobe
- Dual leg configuration
- Custom Attachments Available – contact us
Hear From Our Customers
Interested in hearing how our pushers and tuggers make our customer's lives easier?
Take it from some of our customers:
“I started working at my shop in 1994. We still use that same Automotive PowerPusher nearly every day!! Sure, we’ve replaced batteries and a chain just recently, but all in all, this thing has been the workhorse of our shop. Something that has lasted almost 30 years must be right!"
Brian M.
Caliber Collision
“We love the E-750 Electric Wheelbarrow ! The run flat tires are awesome. We do a lot of work around construction and have had probably 20 nail issues and zero problems. The battery life is insane, we can get an entire week out of a full charge!”
Steve H.
Phoenix Exterior
“The mover is a safe, convenient solution for moving aluminum in various forms, from flat stock to completed boat. It requires no special training and saves us time and labor.”
Anna D.
Alumacraft Boat Co.
“I have had a few people try it out with our custom cart and they like it very much! It makes the job quite simple. We like the speed of it, how it handles, and how easy it is to maneuver.”
Justin F.
Sage Glass
Common Questions About The PowerTug
Thinking about adding the PowerTug into your workflow? Contact us with any questions that you may have, or review some of the commonly asked questions that our sales team receives below:
The capacity of PowerPusher equipment is based on many variables. For this reason, we have set up a talented team to help guide you through the selection process. Fill out our Contact Form or call us at 514-624-3498 for more information.
Yes, the PowerPusher equipment can push and pull.
No, our electric pushers and tugs use regular deep-cycle marine batteries.
None of our machines require a license to operate. Further, most anyone can learn to operate proficiently with very minimal training.
Yes, they are made in Shakopee, Minnesota.
Get in Touch with Ergo1st
Want to learn more about PowerPusher material-handling equipment? The Ergo1st team will help you identify the right solution for your application.
Complete the contact form and a member of our team will follow up to discuss your requirements.